Dubai
AED
0Cart

Tools & Equipment

Sort by:
from A to Z
Show:
16
25012 OEMTOOLS 4-in-1 Combination Snap Ring Pliers G5225012
0.0

Pre-Order: Ships in 10 Days

AED11448
+ −
OEMTOOLS SNAP RING PLIERS The OEMTOOLS 25012 4-in-1 Combination Snap Ring Pliers are designed to quickly remove and Install internal and external snap rings. This pliers set features 4 interchangeable jaw configurations for a variety of applications. For Use with Internal and External Snap...
BrandOEMTOOLS OE Part Number25012
25014 OEMTOOLS Seal Puller G5225014
0.0

Pre-Order: Ships in 10 Days

AED8388
+ −
OEMTOOLS SEAL PULLER The OEMTOOLS Seal Puller has two tips that fit all seal sizes. It pops the seal out easily without pounding or hammering while protecting bearings and races. 2 Tops Fit All Seal Sizes Pops the Seal Out Every Time No Pounding or Hammering Protects Bearings and Races
BrandOEMTOOLS OE Part Number25014
25015 OEMTOOLS 4 Piece Triple Square Bit Set - Metric G5225015
0.0

Pre-Order: Ships in 10 Days

AED12588
+ −
OEMTOOLS WRENCH The OEMTOOLS 4 Piece Triple Square Bit Set (Metric) is ideal for use with a 1/2" wrench or socket. It is constructed from S2 steel for strength and durability. Includes: 6, 8, 10 and 12 mm S2 Steel for Strength and Durability For Use with a 1/2" Wrench or Socket Length: 3"
BrandOEMTOOLS OE Part Number25015
25016 OEMTOOLS Telescoping Magnetic Pocket Pick-up Tool G5225016
0.0

Pre-Order: Ships in 10 Days

AED8988
+ −
OEMTOOLS MAGNETIC PICK UP The OEMTOOLS Telescoping Magnetic Pocket Pick-up Tool lets you easily pick up hard-to-reach items. Made with a rigid stainless steel shaft for strength, it extends over 2 feet and can lift over 1 pound. This magnetic pocket tool is the size of a pen, so it slips...
BrandOEMTOOLS OE Part Number25016
25018 OEMTOOLS 6 and 12 Volt Circuit Tester G5225018
0.0

Pre-Order: Ships in 10 Days

AED10188
+ −
OEMTOOLS CIRCUIT TESTER The OEMTOOLS 6 and 12 Volt Circuit Tester features a super sharp probe with a 48" lead, power on and insulated clip. The inspection probe is set in the threaded ferrel and screwed into the handle. A Hi-Vis bulb is ideal for easy visibility. Super Sharp Probe with 48"...
BrandOEMTOOLS OE Part Number25018
25019 OEMTOOLS Heavy Duty Circuit Tester G5225019
0.0

Pre-Order: Ships in 10 Days

AED14988
+ −
OEMTOOLS CIRCUIT TESTER The OEMTOOLS Heavy Duty Circuit Tester is ideal for testing 6, 12 and 24 volt systems for wire breaks, shorts, fuses, lamps, relays, armatures and more. It features a stainless steel probe with heavy duty 5 ft. cord, heavy plastic handle and insulated ground clip. 6,...
Application12 BrandOEMTOOLS
25022 OEMTOOLS 6 Blade Feeler Gauge with Ruler G5225022
0.0

Pre-Order: Ships in 10 Days

AED7188
+ −
OEMTOOLS FEELER GAUGE The OEMTOOLS 6 Blade Feeler Gauge with Ruler features hardened, tempered steel blades that are laser etched with both Inches and millimeters. Its blade protector has a thumb notch to aid in removal of blades. Each Blade is Laser-Etched with Inches and Millimeters 6...
BrandOEMTOOLS OE Part Number25022
25023 OEMTOOLS Combination Tune-Up Feeler Gauge G5225023
0.0

Pre-Order: Ships in 10 Days

AED11388
+ −
OEMTOOLS FEELER GAUGE The OEMTOOLS Combination Tune-Up Feeler Gauge features hardened and tempered steel blades that are laser etched with both inches and millimeters. Its blade protector has a thumb notch to aid in blade removal. Hardened, Tempered Steel Blades 6 Brass Blades Measure:...
ApplicationSteel BrandOEMTOOLS
25024 OEMTOOLS 22 Blade Go-No-Go Feeler Gauge G5225024
0.0

Pre-Order: Ships in 10 Days

AED11988
+ −
OEMTOOLS FEELER GAUGE The OEMTOOLS 22 Blade Go-No-Go Feeler Gauge is ideal for adjusting tappets. The tips of the blades are ground 0.002" less than normal blade thickness to allow for quick checking of clearances. Each blade is hardened and tempered with laser etched inches and millimeters....
BrandOEMTOOLS OE Part Number25024
25025 OEMTOOLS 26 Blade Master Feeler Gauge G5225025
0.0

Pre-Order: Ships in 10 Days

AED8988
+ −
OEMTOOLS FEELER GAUGE This OEMTOOLS 26 Blade Master Feeler Gauge is perfect for measuring gap widths and other vital measurements. Each blade has been laser etched with SAE and metric sizes and constructed by hardened, tempered steel. This OEMTOOLS Feeler Gauge also features a thumb notch for...
BrandOEMTOOLS OE Part Number25025
25028 OEMTOOLS Adjustable Brake Cylinder Hone G5225028
0.0

Pre-Order: Ships in 10 Days

AED15588
+ −
BrandOEMTOOLS OE Part Number25028
25031 OEMTOOLS NAVISTAR MAXXFORCE Fuel Line 4 Piece Disconnect Tool Set G5225031
0.0

Pre-Order: Ships in 10 Days

AED55188
+ −
OEMTOOLS FUEL LINE DISCONNECT TOOL The OEMTOOLS NAVISTAR® MaxxFORCE® Fuel Line Disconnect Tool Set features 4 tools designed to efficiently remove 11.8 mm and 16 mm fuel lines from Navistar® MaxxForce® Series 11 and 13 engines. 4 Piece Disconnect Tool Set for Navistar® MaxxForce®...
BrandOEMTOOLS OE Part Number25031
25032 OEMTOOLS Adjustable Brake Cylinder Hone G5225032
0.0

Pre-Order: Ships in 10 Days

AED20388
+ −
BrandOEMTOOLS OE Part Number25032
25034 OEMTOOLS Brake Bleeder Wrench G5225034
0.0

Pre-Order: Ships in 10 Days

AED8988
+ −
OEMTOOLS BRAKE BLEEDER WRENCH The OEMTOOLS Brake Bleeder Wrench is ideal for bleeding air from hydraulic systems with 5/16 Inch or 3/8 Inch bleeder screws. 5/16" and 3/8" For Bleeding Air from Brake Cylinders with Bleeder Screws Opens and Closes the Brake Cylinder Bleeder Screws to Bleed...
BrandOEMTOOLS OE Part Number25034
25036 OEMTOOLS Bleed-O-Matic One-Man Brake Bleeder Kit G5225036
0.0

Pre-Order: Ships in 10 Days

AED9588
+ −
OEMTOOLS BRAKE BLEEDER KIT OEMTOOLS offers an outstanding One-Man Brake Bleeder Kit. This OEMTOOLS Bleed-O-Matic Kit features a strong magnet that firmly holds the bleeder bottle to the body of any vehicle, making it ideal for use without assistance! The OEMTOOLS Kit includes fluid collection...
ApplicationBleeder Tubing BrandOEMTOOLS
25037 OEMTOOLS Piston Ring Compressor (2-1/2 in. - 5 in.) G5225037
0.0

Pre-Order: Ships in 10 Days

AED12588
+ −
OEMTOOLS PISTON RING COMPRESSOR The OEMTOOLS Piston Ring Compressor is self-locking with double tension band and heavy duty pawl. It is designed to handle most types of rings in the majority of passenger cars, including those that are channeled and segmented. It has a beaded edge so that the...
BrandOEMTOOLS OE Part Number25037
Show another 16 products
Bestsellers