Dubai
AED
0Cart

Tools & Equipment

Sort by:
from A to Z
Show:
32
25254 OEMTOOLS Master Oil Pressure Switch Deep Socket G5225254
0.0

Pre-Order: Ships in 10 Days

AED13188
+ −
OEMTOOLS DRIVE SOCKET The OEMTOOLS Oil Pressure Switch Socket is ideal for the removal and installation of pressure sending units 2-5/8" long. Fits Most 1" and 1-1/16" Switches 1/2" Drive Chamfered Square Drive Chrome Plated for Professional Look and Easy Clean-up Accepts Oil Pressure...
Applicationlabel: Drive Size BrandOEMTOOLS
25255 OEMTOOLS Oxygen Sensor Thread Chaser G5225255
0.0

Pre-Order: Ships in 10 Days

AED11988
+ −
OEMTOOLS OXYGEN SENSOR THREAD CHASER The OEMTOOLS Oxygen Sensor Thread Chaser is ideal for use with 3/4" hex sockets or 3/8" square drive. Includes sizes M18 x 1.5. It also works with M18 x 1.5 spark plug threads. Use with 3/4" Hex Socket or 3/8" Square Drive Size: M18 x 1.5 Also Works...
BrandOEMTOOLS OE Part Number25255
25256 OEMTOOLS 5/8 in. Small Valve Lapper Tool G5225256
0.0

Pre-Order: Ships in 10 Days

AED8988
+ −
OEMTOOLS VALVE LAPPER The OEMTOOLS Valve Lapper has a 5/8" and 13/16" rubber vacuum cups for most small valve automotive applications. The valve lapping tool will make lapping valves on your cylinder heads a snap. It features a sturdy hardwood handle and rubber suction cups to firmly hold the...
BrandOEMTOOLS OE Part Number25256
25258 OEMTOOLS 5 in. Timing Gear and Pulley Puller G5225258
0.0

Pre-Order: Ships in 10 Days

AED16788
+ −
OEMTOOLS PULLEY PULLER The OEMTOOLS Timing Gear Puller is perfect for servicing crank shaft gears and pulley, as well as timing gears on a wide range of gasoline and diesel-powered engines. 5" Long Yoke Comes with (2) 6" Long 5/16" x 18 Bolts Comes in a Sturdy Blow Mold Storage Case
BrandOEMTOOLS OE Part Number25258
25261 OEMTOOLS 5 Piece Pickle Fork Kit G5225261
0.0

Pre-Order: Ships in 10 Days

AED49788
+ −
OEMTOOLS PICKLE FORK The OEMTOOLS 5 Piece Pickle Fork Set separates ball joints, tie rods, and pittman arms for use with an air or hand hammer. The set includes: tie-rod spread with 11/16" wedge opening, ball-joint separator with 15/16 Inch jaw opening, Pitman arm wedge with 1-1/8" opening,...
BrandOEMTOOLS OE Part Number25261
25262 OEMTOOLS Pitman Arm Puller G5225262
0.0

Pre-Order: Ships in 10 Days

AED17388
+ −
OEMTOOLS PITMAN ARM PULLER The OEMTOOLS Pitman Arm Puller is designed to remove the Pitman arms from domestic cars and light trucks. It is for use on domestic cars and light trucks and comes assembled in clamshell package. 1-5/16" (33 mm) Yoke Opening 2-1/2" (63 mm) Depth Yoke is...
BrandOEMTOOLS OE Part Number25262
25264 OEMTOOLS GM Harmonic Balancer Puller G5225264
0.0

Pre-Order: Ships in 10 Days

AED68388
+ −
OEMTOOLS HARMONIC BALANCER PULLER The OEMTOOLS 25264 GM Harmonic Balancer Puller saves you time when removing harmonic balancers without tapped holes -- no need to remove the radiator. Many balancers found on GM and Chrysler/Jeep/Dodge do not have tapped holes; this tool features a "clip-in"...
BrandOEMTOOLS OE Part Number25264
25265 OEMTOOLS Disc Brake Pad Spreader G5225265
0.0

Pre-Order: Ships in 10 Days

AED12588
+ −
OEMTOOLS BRAKE PAD SPREADER This OEMTOOLS Disc Brake Pad Spreader is perfect for compressing inner brake pads and resetting pistons for easy pad replacement! Also, this OEMTOOLS Spreader works great in tight areas where C-Clamps cannot! Constructed from high carbon steel and high quality...
BrandOEMTOOLS OE Part Number25265
25273 OEMTOOLS 21mm Crank Bolt Socket G5225273
0.0

Pre-Order: Ships in 10 Days

AED23988
+ −
OEMTOOLS DRIVE SOCKET Break loose stubborn crank bolts with an OEMTOOLS Heavy Duty Crank Bolt Socket. Constructed with durable chrome molybdenum steel, these heavy duty impact sockets are designed with more mass for high torque applications. Removing crank bolts can be tiresome work with a...
Applicationlabel: Drive Size BrandOEMTOOLS
25277 OEMTOOLS 22mm Crank Bolt Socket G5225277
0.0

Pre-Order: Ships in 10 Days

AED25788
+ −
OEMTOOLS DRIVE SOCKET Break loose stubborn crank bolts with an OEMTOOLS Heavy Duty Crank Bolt Socket. Constructed with durable chrome molybdenum steel, these heavy duty impact sockets are designed with more mass for high torque applications. Removing crank bolts can be tiresome work with a...
Applicationlabel: Drive Size BrandOEMTOOLS
25282 OEMTOOLS 5/16 & 10MM in. Battery Terminal Wrench G5225282
0.0

Pre-Order: Ships in 10 Days

AED20988
+ −
OEMTOOLS WRENCH The OEMTOOLS Battery Wrench is a ratcheting box style wrench for use on 5/16" and 10 mm battery terminals. It features an extended handle allowing for access to recessed terminals. Length: 12" For Use on 5/16" and 10 mm Battery Terminals
BrandOEMTOOLS OE Part Number25282
25283 OEMTOOLS Battery Carrier G5225283
0.0

Pre-Order: Ships in 10 Days

AED14988
+ −
OEMTOOLS BATTERY CARRIER The OEMTOOLS Battery Carrier is designed for safe and easy carrying of all top and side post batteries with horizontal ridges. Rubber pads securely grips battery widths from 5" to 7" wide. Plastic grip on handle provides a secure hold. Safe and Easy Way to Grab,...
BrandOEMTOOLS OE Part Number25283
25296 OEMTOOLS Inner Tie Rod Tool G5225296
0.0

Pre-Order: Ships in 10 Days

AED17388
+ −
OEMTOOLS INNER TIE ROD TOOL The OEMTOOLS Inner Tie Rod Tool is used to easily turn tie rods. It can easily remove inner tie rod without removing the outer tie rod. Slide the tool over the end and tighten collar to allow access with an extension. Used to Easily Turn Tie Rods Used to Service...
Applicationvalue: Steel Tool Material BrandOEMTOOLS
25297 OEMTOOLS 1-1/16 in. Tie Rod End and Pitman Arm Puller G5225297
0.0

Pre-Order: Ships in 10 Days

AED13788
+ −
OEMTOOLS PITMAN ARM PULLER The OEMTOOLS Tie Rod End and Pitman Arm Puller removes tie rod ends and Pitman arms on compact cars. It will also remove tie-rods on most cars and light trucks. Opening Size: 1-1/16" (27 mm) Drop-Forged Steel Yoke Heat-Treated Pressure Screw Pull Travel: 2-1/8"...
BrandOEMTOOLS OE Part Number25297
25298 OEMTOOLS Pulley Puller Installer Kit G5225298
0.0

Pre-Order: Ships in 10 Days

AED28188
+ −
Application1-1\u002F4 in. BrandOEMTOOLS
25299 OEMTOOLS Tubing Cutter G5225299
0.0

Pre-Order: Ships in 10 Days

AED10284
+ −
OEMTOOLS CUT OFF TOOL The OEMTOOLS Tubing Cutter quickly and cleanly cuts copper, brass, and thin wall steel tubing in close quarters. It features a large, easy-to-grip knob for secure hold. Capacity 1/8" to 1-1/8" 2 Facing Flare Groove Rollers Die Cast Aluminum Frame with Reamer Alloy...
BrandOEMTOOLS OE Part Number25299
25301 OEMTOOLS 6 Piece Door Panel and Trim Removal Set G5225301
0.0

Pre-Order: Ships in 10 Days

AED57588
+ −
OEMTOOLS TRIM PANEL REMOVAL TOOL The OEMTOOLS 25301 Door Panel and Trim Removal Set has 6 tools for efficient trim and upholstery removal. This set includes upholstery tools, clip removal tools and a specialized tool for door handle removal. The rubberized comfort grip handles reduce tool...
ApplicationU-Notch Upholstery Tool BrandOEMTOOLS
25304 OEMTOOLS 12 Blade Valve Tap Feeler Gauge G5225304
0.0

Pre-Order: Ships in 10 Days

AED8004
+ −
OEMTOOLS FEELER GAUGE The OEMTOOLS 12 Blade Valve Tappet Feeler Gauge features hardened and tempered steel blades that are laser etched with inches and millimeters. The 12 offset 30° blades are 4" long and measure 0.008" (0.203 mm) to 0.26" (0.660 mm). Its blade protector has thumb notch to...
BrandOEMTOOLS OE Part Number25304
25305 OEMTOOLS 6 Brass, Non-Magnetic Feeler Gauge Blades G5225305
0.0

Pre-Order: Ships in 10 Days

AED7788
+ −
OEMTOOLS FEELER GAUGE The OEMTOOLS 6 Brass, Non-Magnetic Feeler Gauge Blades feature 3" (76 mm) precision brass blades that measure clearances from 0.006" to 0.016" (0.152 to 406 mm) between reluctor and pickup coil. Each hardened and tempered brass blade is laser etched with both Inches and...
BrandOEMTOOLS OE Part Number25305
25307 OEMTOOLS Universal Lift Support Clamp G5225307
0.0

Pre-Order: Ships in 10 Days

AED20388
+ −
OEMTOOLS LIFT SUPPORT CLAMP The OEMTOOLS Universal Lift Support Clamp holds weak gas-charged lift supports open on hoods, tailgates, hatchbacks and trunks. The clamp securely holds weak lift supports in the extended position to allow access to the engine compartment or luggage area....
BrandOEMTOOLS OE Part Number25307
25315 OEMTOOLS 8 in. Auto Scraper G5225315
0.0

Pre-Order: Ships in 10 Days

AED10788
+ −
OEMTOOLS SCRAPPER The 8" Long Swivel-Type Auto Scraper is deal for removing stickers and excess sealer, adhesive, and caulking from glass. It folds to 4-5/8" and uses any size standard razor blade. The cutting end swings out of the handle and locks in 3 different positions. When not in use,...
BrandOEMTOOLS OE Part Number25315
25316 OEMTOOLS Battery Carrier G5225316
0.0

Pre-Order: Ships in 10 Days

AED15588
+ −
OEMTOOLS BATTERY CARRIER The OEMTOOLS Battery Carrier is the safe and easy way to grab, lift and carry top post and side terminal batteries. This tool is useful for mechanics (who perform battery changes on a variety of automobiles) and it's a handy tool for anyone to have for use on their...
BrandOEMTOOLS OE Part Number25316
25317 OEMTOOLS 8 mm and 10 mm Brake Bleeder Wrench G5225317
0.0

Pre-Order: Ships in 10 Days

AED10788
+ −
OEMTOOLS BRAKE BLEEDER WRENCH The OEMTOOLS Brake Bleeder Wrench is the perfect wrench for bleeding brakes! This Brake Bleeder Wrench opens and closes the brake cylinder bleeder screws to bleed the air out for complete brake adjustments. The metric 2-sided tool allows easy access for 8 mm and...
BrandOEMTOOLS OE Part Number25317
25318 OEMTOOLS Brake Bleeder Wrench G5225318
0.0

Pre-Order: Ships in 10 Days

AED8388
+ −
OEMTOOLS BRAKE BLEEDER WRENCH The OEMTOOLS Brake Bleeder Wrench (1/4" and 3/8") opens and closes the brake cylinder bleeder screws to bleed the air out for complete brake adjustments. The SAE 2-sided tool allows easy access for 1/4" and 3/8" bleeder screws. For Bleeding Air from Brake...
BrandOEMTOOLS OE Part Number25318
25319 OEMTOOLS Windshield Wiper Arm Puller G5225319
0.0

Pre-Order: Ships in 10 Days

AED13188
+ −
OEMTOOLS PULLEY PULLER The OEMTOOLS Windshield Wiper Arm Puller easily removes wiper arms on most domestic and foreign vehicles. This Arm Puller features a turning knob for fast work and a forged body for strength. The compact design of this Windshield Wiper Arm Puller works great in tight...
Applicationvalue: Windshield Wiper Arm Puller BrandOEMTOOLS
25320 OEMTOOLS Oil Filter Wrench Pliers G5225320
0.0

Pre-Order: Ships in 10 Days

AED14388
+ −
OEMTOOLS OIL FILTER WRENCH The OEMTOOLS Oil Filter Wrench Pliers (2-1/2 to 4-5/8 inch, 63.5 to 117.5 mm) feature heavy duty forged steel jaws for strength and durability, providing a sure grip on even the toughest oil filters. They are bent 20 degrees for work in tight spots and have built-in...
BrandOEMTOOLS OE Part Number25320
25323 OEMTOOLS Oil Filter Wrench - Universal, Sold individually G5225323
0.0

Pre-Order: Ships in 10 Days

AED26388
+ −
*-*-*
BrandOEMTOOLS OE Part Number25323
25324 OEMTOOLS 14 in. Adjustable Oil Filter Pliers G5225324
0.0

Pre-Order: Ships in 10 Days

AED29388
+ −
OEMTOOLS OIL FILTER WRENCH The OEMTOOLS 25324 14" Adjustable Oil Filter Pliers are designed to remove stubborn oil filters from gas or diesel engines. Suitable for Filters with 2.4" - 5" Diameters Long Reach Slip Joint Design Precision Machined Jaw Non-Slip Comfort Grip
BrandOEMTOOLS OE Part Number25324
25327 OEMTOOLS Tailpipe Expander 1-1/2 in. to 2-7/16 in. G5225327
0.0

Pre-Order: Ships in 10 Days

AED29388
+ −
OEMTOOLS EXHAUST PIPE EXPANDER Tail Pipe Expanders are used to remove the crimps caused by u-bolt clamps. The inside hex nut tool is turned to expand out the sides and push out the crimps. Features Extra-long Hex Bar and Alloy Steel Construction
BrandOEMTOOLS OE Part Number25327
25339 OEMTOOLS Windshield Wiper Arm Tool G5225339
0.0

Pre-Order: Ships in 10 Days

AED31944
+ −
OEMTOOLS PULLEY PULLER The Universal Wiper Arm Puller is used to remove the wiper arm without damaging the arm or hood cowling Adjustable, Compact and Easy to Use Prevents Damage to Wiper Arm Cross-Piece Special for Wiper Featuring a Nozzle
BrandOEMTOOLS OE Part Number25339
25341 OEMTOOLS 17 Mini-Blade Ignition Feeler Gauge G5225341
0.0

Pre-Order: Ships in 10 Days

AED8988
+ −
OEMTOOLS FEELER GAUGE The OEMTOOLS 17 Mini-Blade Ignition Feeler Gauge is ideal for measuring the point gap on older ignition systems. Each brass blade is laser etched with both inches and millimeters. Its blade protector has thumb notch to aid in removal of blades. Ideal for Measuring the...
BrandOEMTOOLS OE Part Number25341
25342 OEMTOOLS 2 Piece Ignition Point and Utility File G5225342
0.0

Pre-Order: Ships in 10 Days

AED7788
+ −
OEMTOOLS FILE SET The OEMTOOLS Mini Ignition Point Utility File feature long, thin blades that file points on spark plugs and other Small objects. They are great for dressing contact points. Includes 2 Files Made with Hardened and Tempered Steel for Strength and Finely Ground for Precision...
BrandOEMTOOLS OE Part Number25342
Show another 32 products
Bestsellers