Dubai
€
0Cart

Tools & Equipment

Sort by:
from A to Z
Show:
32
25012 OEMTOOLS 4-in-1 Combination Snap Ring Pliers G5225012
0.0

Pre-Order: Ships in 10 Days

€2884
+ −
OEMTOOLS SNAP RING PLIERS The OEMTOOLS 25012 4-in-1 Combination Snap Ring Pliers are designed to quickly remove and Install internal and external snap rings. This pliers set features 4 interchangeable jaw configurations for a variety of applications. For Use with Internal and External Snap...
BrandOEMTOOLS OE Part Number25012
25014 OEMTOOLS Seal Puller G5225014
0.0

Pre-Order: Ships in 10 Days

€2113
+ −
OEMTOOLS SEAL PULLER The OEMTOOLS Seal Puller has two tips that fit all seal sizes. It pops the seal out easily without pounding or hammering while protecting bearings and races. 2 Tops Fit All Seal Sizes Pops the Seal Out Every Time No Pounding or Hammering Protects Bearings and Races
BrandOEMTOOLS OE Part Number25014
25015 OEMTOOLS 4 Piece Triple Square Bit Set - Metric G5225015
0.0

Pre-Order: Ships in 10 Days

€3171
+ −
OEMTOOLS WRENCH The OEMTOOLS 4 Piece Triple Square Bit Set (Metric) is ideal for use with a 1/2" wrench or socket. It is constructed from S2 steel for strength and durability. Includes: 6, 8, 10 and 12 mm S2 Steel for Strength and Durability For Use with a 1/2" Wrench or Socket Length: 3"
BrandOEMTOOLS OE Part Number25015
25016 OEMTOOLS Telescoping Magnetic Pocket Pick-up Tool G5225016
0.0

Pre-Order: Ships in 10 Days

€2264
+ −
OEMTOOLS MAGNETIC PICK UP The OEMTOOLS Telescoping Magnetic Pocket Pick-up Tool lets you easily pick up hard-to-reach items. Made with a rigid stainless steel shaft for strength, it extends over 2 feet and can lift over 1 pound. This magnetic pocket tool is the size of a pen, so it slips...
BrandOEMTOOLS OE Part Number25016
25018 OEMTOOLS 6 and 12 Volt Circuit Tester G5225018
0.0

Pre-Order: Ships in 10 Days

€2566
+ −
OEMTOOLS CIRCUIT TESTER The OEMTOOLS 6 and 12 Volt Circuit Tester features a super sharp probe with a 48" lead, power on and insulated clip. The inspection probe is set in the threaded ferrel and screwed into the handle. A Hi-Vis bulb is ideal for easy visibility. Super Sharp Probe with 48"...
BrandOEMTOOLS OE Part Number25018
25019 OEMTOOLS Heavy Duty Circuit Tester G5225019
0.0

Pre-Order: Ships in 10 Days

€3775
+ −
OEMTOOLS CIRCUIT TESTER The OEMTOOLS Heavy Duty Circuit Tester is ideal for testing 6, 12 and 24 volt systems for wire breaks, shorts, fuses, lamps, relays, armatures and more. It features a stainless steel probe with heavy duty 5 ft. cord, heavy plastic handle and insulated ground clip. 6,...
Application12 BrandOEMTOOLS
25022 OEMTOOLS 6 Blade Feeler Gauge with Ruler G5225022
0.0

Pre-Order: Ships in 10 Days

€1811
+ −
OEMTOOLS FEELER GAUGE The OEMTOOLS 6 Blade Feeler Gauge with Ruler features hardened, tempered steel blades that are laser etched with both Inches and millimeters. Its blade protector has a thumb notch to aid in removal of blades. Each Blade is Laser-Etched with Inches and Millimeters 6...
BrandOEMTOOLS OE Part Number25022
25023 OEMTOOLS Combination Tune-Up Feeler Gauge G5225023
0.0

Pre-Order: Ships in 10 Days

€2869
+ −
OEMTOOLS FEELER GAUGE The OEMTOOLS Combination Tune-Up Feeler Gauge features hardened and tempered steel blades that are laser etched with both inches and millimeters. Its blade protector has a thumb notch to aid in blade removal. Hardened, Tempered Steel Blades 6 Brass Blades Measure:...
ApplicationSteel BrandOEMTOOLS
25024 OEMTOOLS 22 Blade Go-No-Go Feeler Gauge G5225024
0.0

Pre-Order: Ships in 10 Days

€3020
+ −
OEMTOOLS FEELER GAUGE The OEMTOOLS 22 Blade Go-No-Go Feeler Gauge is ideal for adjusting tappets. The tips of the blades are ground 0.002" less than normal blade thickness to allow for quick checking of clearances. Each blade is hardened and tempered with laser etched inches and millimeters....
BrandOEMTOOLS OE Part Number25024
25025 OEMTOOLS 26 Blade Master Feeler Gauge G5225025
0.0

Pre-Order: Ships in 10 Days

€2264
+ −
OEMTOOLS FEELER GAUGE This OEMTOOLS 26 Blade Master Feeler Gauge is perfect for measuring gap widths and other vital measurements. Each blade has been laser etched with SAE and metric sizes and constructed by hardened, tempered steel. This OEMTOOLS Feeler Gauge also features a thumb notch for...
BrandOEMTOOLS OE Part Number25025
25028 OEMTOOLS Adjustable Brake Cylinder Hone G5225028
0.0

Pre-Order: Ships in 10 Days

€3926
+ −
BrandOEMTOOLS OE Part Number25028
25031 OEMTOOLS NAVISTAR MAXXFORCE Fuel Line 4 Piece Disconnect Tool Set G5225031
0.0

Pre-Order: Ships in 10 Days

€13901
+ −
OEMTOOLS FUEL LINE DISCONNECT TOOL The OEMTOOLS NAVISTAR® MaxxFORCE® Fuel Line Disconnect Tool Set features 4 tools designed to efficiently remove 11.8 mm and 16 mm fuel lines from Navistar® MaxxForce® Series 11 and 13 engines. 4 Piece Disconnect Tool Set for Navistar® MaxxForce®...
BrandOEMTOOLS OE Part Number25031
25032 OEMTOOLS Adjustable Brake Cylinder Hone G5225032
0.0

Pre-Order: Ships in 10 Days

€5136
+ −
BrandOEMTOOLS OE Part Number25032
25034 OEMTOOLS Brake Bleeder Wrench G5225034
0.0

Pre-Order: Ships in 10 Days

€2264
+ −
OEMTOOLS BRAKE BLEEDER WRENCH The OEMTOOLS Brake Bleeder Wrench is ideal for bleeding air from hydraulic systems with 5/16 Inch or 3/8 Inch bleeder screws. 5/16" and 3/8" For Bleeding Air from Brake Cylinders with Bleeder Screws Opens and Closes the Brake Cylinder Bleeder Screws to Bleed...
BrandOEMTOOLS OE Part Number25034
25036 OEMTOOLS Bleed-O-Matic One-Man Brake Bleeder Kit G5225036
0.0

Pre-Order: Ships in 10 Days

€2415
+ −
OEMTOOLS BRAKE BLEEDER KIT OEMTOOLS offers an outstanding One-Man Brake Bleeder Kit. This OEMTOOLS Bleed-O-Matic Kit features a strong magnet that firmly holds the bleeder bottle to the body of any vehicle, making it ideal for use without assistance! The OEMTOOLS Kit includes fluid collection...
ApplicationBleeder Tubing BrandOEMTOOLS
25037 OEMTOOLS Piston Ring Compressor (2-1/2 in. - 5 in.) G5225037
0.0

Pre-Order: Ships in 10 Days

€3171
+ −
OEMTOOLS PISTON RING COMPRESSOR The OEMTOOLS Piston Ring Compressor is self-locking with double tension band and heavy duty pawl. It is designed to handle most types of rings in the majority of passenger cars, including those that are channeled and segmented. It has a beaded edge so that the...
BrandOEMTOOLS OE Part Number25037
25039 OEMTOOLS Piston Ring Compressor (3-1/2 in. - 7 in.) G5225039
0.0

Pre-Order: Ships in 10 Days

€3473
+ −
OEMTOOLS PISTON RING COMPRESSOR The OEMTOOLS Piston Ring Compressor is self-locking with double tension band and heavy duty pawl. It is designed to handle most types of rings in the majority of passenger cars, including those that are channeled and segmented. It has a beaded edge so that the...
BrandOEMTOOLS OE Part Number25039
25040 OEMTOOLS Valve Lapper, Large G5225040
0.0

Pre-Order: Ships in 10 Days

€2016
+ −
OEMTOOLS EXTRACTOR SET The OEMTOOLS Large Valve Lapper Tool is used to perform the final profile lapping of the valve seat. The 9" handle is comfortably shaped, and ideal for quick and smooth rotations. It features a grease and oil resistant construction. For Hand Lapping Valves 1-1/8" and...
BrandOEMTOOLS OE Part Number25040
25041 OEMTOOLS Adjustable Engine Cylinder Hone Deglazer G5225041
0.0

Pre-Order: Ships in 10 Days

€7554
+ −
OEMTOOLS CYLINDER HONE The OEMTOOLS Adjustable Cylinder Hone/Deglazer is designed for fast and accurate deglazing of cylinders. Its powerful arm design keeps the abrasives accurately in line. It features a spring tension adjusting nut for positive cutting action at all speeds and smooth...
Applicationand 7 in. Max. Cylinder Size; With 4 in. Medium Grit Stones; Use Replacement Stones from OEMTOOLS (2541F BrandOEMTOOLS
25042 OEMTOOLS Air Conditioner/Fuel Line Disconnect Tool G5225042
0.0

Pre-Order: Ships in 10 Days

€2113
+ −
OEMTOOLS A/C LINE DISCONNECT TOOL The OEMTOOLS Scissor-Style Air Conditioning/Fuel Line Disconnect Tool releases spring like couplings on fuel and air conditioning lines on most Ford and Chrysler LH series vehicles. It is also used to release the locking mechanism on all 4 size ranges. The...
Applicationvalue: A (3\u002F4 in.) BrandOEMTOOLS
25043 OEMTOOLS Fuel Line Disconnect Tool G5225043
0.0

Pre-Order: Ships in 10 Days

€2264
+ −
OEMTOOLS FUEL LINE DISCONNECT TOOL The OEMTOOLS Scissor-Style Fuel Line Disconnect Tool features a scissor-like design that allows for easy, damage-free fuel line quick disconnect coupler release. Simply place the tool around the fuel line and push into the female connector to release the...
BrandOEMTOOLS OE Part Number25043
25045 OEMTOOLS Spark Plug Wire Tester G5225045
0.0

Pre-Order: Ships in 10 Days

€2113
+ −
OEMTOOLS SPARK TESTER The OEMTOOLS Spark Plug Wire Tester is used to locate faulty plug wires. Used to Locate Faulty Plug Wires Instructions Included
BrandOEMTOOLS OE Part Number25045
25049 OEMTOOLS Piston Ring Expander G5225049
0.0

Pre-Order: Ships in 10 Days

€2113
+ −
OEMTOOLS PISTON RING EXPANDER The OEMTOOLS Piston Ring Expander easily installs piston rings and works on most common piston and ring diameters from 3/64" to 1/4" thick. It features a comfortable vinyl handle for sure grip. Makes Installing Piston Rings Easy Works on Most Common Piston...
BrandOEMTOOLS OE Part Number25049
25052 OEMTOOLS Air Conditioning/Fuel Line Disconnect Tool Set G5225052
0.0

Pre-Order: Ships in 10 Days

€1811
+ −
Applicationvalue: 5\u002F16 in. BrandOEMTOOLS
25053 OEMTOOLS Heavy Duty Harmonic Balancer Puller Set G5225053
0.0

Pre-Order: Ships in 10 Days

€5136
+ −
BrandOEMTOOLS OE Part Number25053
25056 OEMTOOLS Brake Spring Washer Tool G5225056
0.0

Pre-Order: Ships in 10 Days

€2415
+ −
OEMTOOLS BRAKE SPRING TOOL The OEMTOOLS Brake Spring Washer Tool is the perfect tool for you, fitting both large and small washers! This Washer Tool removes and installs brake spring washers 5/8" to 7/8" diameter. Don't pass up this great tool! For Use with Washers 5/8" to 7/8" Fits Both...
BrandOEMTOOLS OE Part Number25056
25058 OEMTOOLS Mini Tubing Cutter G5225058
0.0

Pre-Order: Ships in 10 Days

€2566
+ −
OEMTOOLS TUBING CUTTER The OEMTOOLS Mini Tubing Cutter quickly and cleanly cuts copper, brass, and thin wall steel tubing in close quarters. The cutter is capable of turning on a 1-7/8" radius. It cuts tubing from 1/8" to 7/8" O.D. Capable of Turning on a 1-7/8" Radius Cuts Tubing from...
BrandOEMTOOLS OE Part Number25058
25061 OEMTOOLS Spark Plug Wire Puller G5225061
0.0

Pre-Order: Ships in 10 Days

€1962
+ −
OEMTOOLS SPARK PLUG WIRE PULLER The OEMTOOLS Oil Spark Plug Wire Puller features a heavy duty plastic construction that insulates hands from electric shock and grips directly on boot to prevent wire damage. Heavy Duty Plastic Construction Insulates Hands from Electric Shock Grips Directly...
BrandOEMTOOLS OE Part Number25061
25065 OEMTOOLS 1/8 in. and 1/4 in. Bolt Extractor G5225065
0.0

Pre-Order: Ships in 10 Days

€1442
+ −
OEMTOOLS EXTRACTOR SET The OEMTOOLS Bolt Extractor for removal of 1/4" and 1/8" broken bolts, set screws, pipes and grease fittings. Drill Size: 5/64" Twist Style, Forged Alloy Steel Extractors Used to Remove Broken Bolts, Set Screws, Pipes and Alternate Fittings For Removing Size 1/4"...
Applicationvalue: 5\u002F64 in. Drill Size; For Removing Size 1\u002F4 in. and 1\u002F8 in. Bolts BrandOEMTOOLS
25067 OEMTOOLS 5/16 in. and 7/16 in. Bolt Extractor G5225067
0.0

Pre-Order: Ships in 10 Days

€1811
+ −
OEMTOOLS EXTRACTOR SET The OEMTOOLS 5/16 Inch and 7/16 Inch Bolt Extractor is a twist-style forged alloy steel extractor that can be used to remove broken bolts or to set screws, pipes and alternate fittings. Drill Size: 5/32" For Removal of Broken Bolts or for Setting Screws, Pipes and...
BrandOEMTOOLS OE Part Number25067
25069 OEMTOOLS Adjustable Ignition Spark Tester G5225069
0.0

Pre-Order: Ships in 10 Days

€3020
+ −
OEMTOOLS SPARK TESTER The OEMTOOLS Adjustable Spark Tester is ideal for testing the ignition systems of automobiles to lawnmowers. It works on ignition systems from high energy electronic automotive systems to Small engines by simulating the spark plug under compression load. It is simple to...
Applicationvalue: Use to Test Ignition Systems of Automobiles to Lawnmowers BrandOEMTOOLS
25071 OEMTOOLS Rear Disc Brake Piston Tool G5225071
0.0

Pre-Order: Ships in 10 Days

€2264
+ −
OEMTOOLS DISC BRAKE PISTON TOOL The OEMTOOLS Rear Disc Brake Piston is a must for replacing most rear disc brakes. It rotates pistons back into brake calipers when changing brake pads. A unique "cube" design provides five drive pin configurations to fit most applications. For Use with 3/8"...
BrandOEMTOOLS OE Part Number25071
Show another 32 products
Bestsellers