Tools & Equipment

0.0

Pre-Order: Ships in 10 Days

12390
+
OEMTOOLS FLUID PUMP Simple Lever-Action Pumps handle a range of liquids from oils to acids. Models available with poly or Ryton® bodies, steel or stainless rods and Viton® or Teflon® seals. Lever Action Pump, Self-Priming Fits in 15, 30 or 55 Gallon Drums with 1.25" & 2" NPT Bung...
Applicationlabel: Notes BrandOEMTOOLS
OEMTOOLS FLUID PUMP Simple Lever-Action Pumps handle a range of liquids from oils to acids. Models available with poly or Ryton® bodies, steel or stainless rods and Viton® or Teflon® seals. Lever Action Pump, Self-Priming Fits in 15, 30 or 55 Gallon Drums with 1.25" & 2" NPT Bung...
Applicationvalue: 40 Wt. Oil Max Viscosity; Self-Priming Pump; Suitable for 15 BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

17528
+
OEMTOOLS FLUID PUMP Simple Lever-Action Pumps handle a range of liquids from oils to acids. Models available with poly or Ryton® bodies, steel or stainless rods and Viton® or Teflon® seals. Lever Action Pump, Self-Priming Fits in 15, 30 or 55 Gallon Drums with 1.25" & 2" NPT Bung...
Application30 or 55 Gallon Drums; Recommended for Water-Based Chemicals BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

39482
+
OEMTOOLS JUMP STARTER Never get stranded without power again. The OEMTOOLS 24475 12000 mAh Li-ion Jump Starter and Power Bank is a portable power bank powerful enough to jump start your car. Equipped with 300 cold cranking amps, this jump starter will jump start up to 5.4L V8 engines. The...
BrandOEMTOOLS OE Part Number24475
0.0

Pre-Order: Ships in 10 Days

22818
+
OEMTOOLS AXLE NUT SOCKET The OEMTOOLS 8 Piece Axle Nut 12 Pt. Socket Set is used for removing front wheel drive axle nuts. Features chrome moly steel construction for strength and durability and is impact rated. Includes: 29, 30, 32, 34, 35, 36, 38 and 39 mm (12 Pt.) 1/2" Drive Sockets...
Application30 BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

50173
+
OEMTOOLS IMPACT DRIVER The OEMTOOLS Heavy Duty 1/2" Drive Li-ion Impact Wrench is used for tightening or loosening nuts and bolts, automotive repair, body shop maintenance and other applications. Rubber, ergonomic grip adds comfort and reduces fatigue. The 20V Max.* Li-ion battery gives you...
Applicationvalue: 1\u002F2 in. Drive; 0-2200 RPM and 0-2900 IPM Speed Transmission; 300 ft\u002Flb. Nut Busting Torque; 260 ft\u002Flb. Tightening Torque BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

39615
+
OEMTOOLS DRILL The OEMTOOLS Heavy Duty 1/2" Cordless 2 Speed 20V Li-ion Drill is used for drilling holes, driving screws, loosening or tightening various materials together with fasteners and other applications. The drill features Li-ion technology for maximum torque and a variable speed...
BrandOEMTOOLS OE Part Number24482
0.0

Pre-Order: Ships in 10 Days

41710
+
OEMTOOLS DRILL The OEMTOOLS 20V Max.* Li-ion 1/2 Inch Brushless Drill is ready for anything -- drilling holes, driving screws, and loosening or tightening a variety of fasteners. Fully equipped with a rugged exterior and efficient motor, this drill is built to last. The brushless motor...
Applicationvalue: 2.0 Ah - Li-ion Battery; 310 in.\u002Flb. Max Torque; 0-600 RPM and 0-2 BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

33246
+
OEMTOOLS DRILL The OEMTOOLS 20V Max.* Li-ion 1/2 Inch Brushless Hammer Drill is designed to penetrate hard surfaces with ease. Encased within the rugged exterior, the brushless motor provides extended run times, more torque and increased durability. Inside and out, this tool is built to last....
Applicationvalue: 2.0 Ah - Li-ion Battery; 310 in.\u002Flb. Max Torque; 0-600 RPM and 0-2 BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

46244
+
OEMTOOLS IMPACT DRIVER The OEMTOOLS 20V Max.* Li-ion Brushless 1/4 Inch Impact Driver is designed with a brushless motor with 40% longer run time and 20% more torque, and it's 10 times more durable. Its electric brake stops rotation of the tool immediately when the trigger is released to...
Applicationvalue: 1\u002F4 in. Drive; 0-3 BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

46546
+
OEMTOOLS GRINDER The OEMTOOLS 20V Max.* Li-ion Cordless Angle Grinder features Li-ion technology and gets the job done using a high-capacity 4.0Ah Li-ion slide battery for longer life and more power. It is designed with an electric brake that stops rotation of the tool immediately when the...
Applicationvalue: Angled Grinder; 4-1\u002F2 in. Maximum Disc Diameter; 5\u002F8 in. Thread Spindle; 10 BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

64078
+
OEMTOOLS RATCHET The OEMTOOLS R2 Rechargeable Speed Ratchet is the next step in handheld tool evolution. The R2 has been tested to be up to 7 times faster than a conventional ratchet when tightening or removing fasteners. Its low-profile design and lightweight construction make the R2 a...
Applicationvalue: 1\u002F2 in. Drive; Stubby Style; Reversible Head; Press-To-Release Button; Includes (2) Rechargeable 2000 mAh Li-ion Batteries BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

68007
+
OEMTOOLS RATCHET The OEMTOOLS R2 Rechargeable Speed Ratchet is the next step in handheld tool evolution. The R2 has been tested to be up to 7 times faster than a conventional ratchet when tightening or removing fasteners. Its low-profile design and lightweight construction make the R2 a...
ApplicationCharging Base and Adapter BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

14657
+
OEMTOOLS HEAT GUN The OEMTOOLS Dual Temp Heat Gun is built with power and comfort to get the job done, featuring temperature settings of 482° F (250° C) and 842° F (450° C). The gun is great for a variety of applications such as: removing paint, heating shrink wrap, thawing pipes and...
Applicationvalue: 1 BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

9670
+
OEMTOOLS FLUID PUMP The OEMTOOLS Multi-purpose Drill Powered Pump is designed to be used in combination with a corded or cordless drill to transfer the following liquids: fresh water, sea water, organic solvents, motor oil, heating oil, insecticides, and liquid fertilizers. Delivery Rate:...
Applicationvalue: 3 BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

4229
+
OEMTOOLS BATTERY TESTER Large tester uses gravity with the number of floating discs to show state of battery charge. Specific gravity levels are printed on the tough, see-through plastic body. Large 16-1/4" Professional Disc-Type Tester Accurate at All Temperatures One-Piece Rubber Bulb,...
Applicationvalue: 16-1\u002F4 in. Professional Disc-Type Tester; With 1-Pc Rubber Bulb; Accurate Up to -40 Degree Fahrenheit BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

61357
+
OEMTOOLS COOLING SYSTEM PRESSURE TESTER The OEMTOOLS 24511 Heavy Duty Cooling System Pressure Test and Refill Kit is designed to test for cooling system leaks in cars, light trucks and large OTR trucks. This set utilizes shop air to hold continuous pressure to test for cooling system leaks,...
ApplicationVenturi Assembly BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

19342
+
OEMTOOLS A/C FLUSH KIT Makes flushing contaminants, including sealants and oil from A/C system components fast and easy. It uses shop air to pressurize the solvent and thoroughly cleans the system. It reduces comebacks by removing debris that can stop up system and cause compressor failure....
Applicationvalue: 6.1 in. W x 3.93 in. H; 13.98 in. Depth; With Pressure Protection Switch and Adaptor Hose BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

9518
+
OEMTOOLS TUBING CUTTER Its unique ratcheting action allows for cuts without rotating tool completely around the tubing. One Hand Operation Designed to Work in Tight Spaces Cuts Copper, Aluminum, Stainless and PVC Cuts 1/4" to 7/8" Tubing Spare Cutting Wheel Included
ApplicationAluminum BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

15564
+
OEMTOOLS BEARING DRIVER Efficiently install 2 bearing cups in one easy process with the OEMTOOLS 24549 Automotive Bearing Cup Installer. This innovative Installer features magnetic contact points to retain bearing cups during installation. For the Installation of Bearing Cups on Light and...
BrandOEMTOOLS OE Part Number24549
0.0

Pre-Order: Ships in 10 Days

1659
+
OEMTOOLS VALVE CORE TOOL Double ended valve core tool to service both standard and large bore R134a and R12 cores.
Applicationvalue: Double Ended Valve Core for Large and Standard Bore R134a and R12 Cores BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

33246
+
OEMTOOLS WORK LIGHT The OEMTOOLS Rechargeable Multi-Use Work Light is the brightest hand held light on the market. This light is ideal for both under hood and under dash repairs. 39 Super bright LEDs put out an incredible 1000 Lumens and the 2 super strong magnets on each end allow you to...
BrandOEMTOOLS OE Part Number24604
0.0

Pre-Order: Ships in 10 Days

15866
+
OEMTOOLS WORK LIGHT The OEMTOOLS Rechargeable Multi-Use Work Light is the brightest hand held light on the market. This light is ideal for both under hood and under dash repairs. Super bright LEDs put out an incredible 330 Lumens and the 2 super strong magnets on each end allow you to attach...
ApplicationMedium BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

21005
+
*-*-*
BrandOEMTOOLS OE Part Number24607
0.0

Pre-Order: Ships in 10 Days

29317
+
OEMTOOLS WORK LIGHT The OEMTOOLS Rechargeable Multi-Use Work Light is your go-to work light--powerful illumination, reliable diagnostics and a dependable back-up power source. This work light features a yellow light setting for smoke detection and a UV light for A/C leak detection, so you...
ApplicationYellow BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

5589
+
OEMTOOLS WORK LIGHT This versatile slim work light is lightweight but powerful enough to provide as much light as you need. You can illuminate a wider area thanks to the 360° Swivel and Lock feature that allows the LED bulbs to be fully adjustable. With a unique variable dial, you control...
Applicationlabel: Notes BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

26596
+
OEMTOOLS WORK LIGHT End the struggle to light your workspace -- the OEMTOOLS 24648 Rechargeable Multi-Head Work Light Set is designed for functionality and ease-of-use. This multi-head work light with magnetic base features a quick-release coupler, so you can effortlessly change between...
BrandOEMTOOLS OE Part Number24648
0.0

Pre-Order: Ships in 10 Days

19342
+
OEMTOOLS DRILL The OEMTOOLS 20V Max.* Li-ion 3/8 Inch Drive Cordless Drill is used for drilling holes, driving screws, loosening or tightening various materials together with fasteners and other applications. The drill uses a high-capacity, 1.5Ah Li-ion slide battery for longer life and more...
BrandOEMTOOLS OE Part Number24660
0.0

Pre-Order: Ships in 10 Days

21005
+
OEMTOOLS IMPACT DRIVER The OEMTOOLS 20V Max.* Li-ion 3/8 Inch Drive Cordless Impact Wrench is used for tightening or loosening nuts and bolts, automotive repair, body shop maintenance and other applications. The Impact Wrench uses a high-capacity, 1.5Ah Li-ion slide battery with the latest...
Applicationvalue: 3\u002F8 in. Drive Size; 0-2 BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

14506
+
OEMTOOLS GRINDER The OEMTOOLS 4-1/2" Compact Angle Grinder features a composite body designed for general grinding, sanding, honing, polishing, porting and gasket removal. It is designed with a spindle lock for easy wheel changes and a top mounted switch for left or right handed use. Input...
Applicationvalue: 6 Amp; 120V BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

9065
+
OEMTOOLS MULTI TOOL The OEMTOOLS Rotary Tool 35 Piece Accessory Kit polishes, grinds, cuts, shapes and sands metals. Its powerful 1.2 Amp motor will grind through the toughest jobs and won't stall. This Rotary Tool has a 1/8" collet with housing that fits most brand name accessories and...
Applicationvalue: 110 Voltage; 1.2 Amp Input Power; 35 BrandOEMTOOLS
0.0

Pre-Order: Ships in 10 Days

10274
+
OEMTOOLS HEAT GUN The OEMTOOLS Dual Temp Heat Gun is used for removing paint, heating shrink wrap, thawing pipes, loosening seized bolts and nuts and other applications. It is built with a powerful 10 Amp, 120V, 60Hz motor to get the job done. It features a 3 position trigger for easy...
BrandOEMTOOLS OE Part Number24665
Show another 32 products
Bestsellers