0.0
On backorder
AED5394
+
LISLE BRAKE HONE STONE SET -- A set of replacement stones for part number 10000; Comes skin-packed.
Application1.13 in. long stones BrandLisle
0.0
On backorder
AED5994
+
LISLE BRAKE HONE STONE SET -- A set of replacement stones for part number 10400; Comes skin-packed.
BrandLisle OE Part Number10490
0.0
On backorder
AED5094
+
LISLE BRAKE HONE STONE SET -- A set of replacement stones for part number 10500; Comes skin-packed.
BrandLisle OE Part Number10550
0.0
On backorder
AED74394
+
LISLE OIL LIFT DRAIN -- A specially shaped, translucent jug that holds 8 gallons; Features reinforced base that will not wrap with hot oil, heavy duty and quick release height adjustment clamp, large handle, big pour spout with threaded cap, and large 15 in. funnel has strainer built-in to catch...
BrandLisle OE Part Number11102
0.0
On backorder
AED6594
+
LISLE BATTERY BRUSH -- Designed to clean dirt and corrosion from battery terminals and cable clamps; External brush cleans cable clamps and internal brush cleans terminal posts; With high impact plastic case that will not weaken in cleaning solutions; Comes skin-packed.
BrandLisle OE Part Number11120
0.0
On backorder
AED7194
+
LISLE SIDE TERMINAL BATTERY CLEANER -- A special tool with coil spring cutters that polish the battery contact and stainless steel brushes that clean the cable terminals; Comes skin-packed.
BrandLisle OE Part Number11400
0.0
On backorder
AED16794
+
LISLE HOSE CUTTER -- Features reversible stainless steel blade for longer life while the plier is made of glass filled nylon for strength; Designed to cleanly cut flexible heater hoses, fuel lines, and other types of flexible hoses up to 1-1/4 in.
BrandLisle OE Part Number11420
0.0
On backorder
AED14994
+
LISLE LARGE MASTER CHUCK KEYS -- Includes 2 handy chuck keys, each with 4 sizes; Made from cast alloy steel for strength; Have strong neodymium magnets for attachment close to the worksite or toolbox; Eight different chuck key sizes cover the most popular chucks available.
BrandLisle OE Part Number12060
LISLE DUAL DRIVE OXYGEN SENSOR WRENCH -- Comes with both 1/2 in. and 3/8 in. drive; Made of forged, heat treated steel with six point design to withstand high torque removal applications; Features slotted body design to allow clearance for wire harness; Can be use with breaker bar to loosen...
BrandLisle OE Part Number12390
0.0
On backorder
AED22794
+
LISLE BEARING RACE AND SEAL DRIVER SET -- Includes 6 drivers; Makes it easier to insert bearing race; Helps reduce damage to both race and axle housing; Comes in a clam shell packaging.
Application1.75 in. BrandLisle
0.0
On backorder
AED55794
+
LISLE PNEUMATIC BEARING RACE AND SEAL DRIVER SET -- This master set includes 11 drivers with sizes 1.565, 1.750, 1.965, 2.325, 2.555, 2.830, 2.995, 2.470, 4.625, 3.813, and 3.180 in.; With two handles, one for hammering and a pneumatic handle for use with an air hammer; Use the tapered driver...
Applicationone pneumatic air hammer handle BrandLisle
0.0
On backorder
AED38394
+
LISLE BEARING RACE AND SEAL DRIVER SET -- This master set includes 9 drivers to fit most common wheel bearings; Makes it easier to insert bearing race; Helps reduce damage to both race and axle housing; Comes in a molded case.
Application1.75 in. BrandLisle
0.0
On backorder
AED7794
+
LISLE ELECTRICAL CONNECTOR SEPARATOR -- This tool is double-ended to fit different access angles; Quickly disconnects electrical connectors without damage; Works on Weather Pack and other automotive electrical connectors; Comes skin-packed.
BrandLisle OE Part Number13120
0.0
On backorder
AED6594
+
LISLE PARTS CLEANING BRUSH -- Features polypropylene bristles that hold up under repeated use in cleaning solvents; Designed to remove dirt and grease from motors, machinery, and metal part; Comes skin-packed.
BrandLisle OE Part Number14000
0.0
On backorder
AED6594
+
LISLE SCRATCH BRUSH -- 14 in. length; Features 5-1/2 in. long densely packed wire bristles and hardwood handle; Removes rust, scale, paint, and solder from metal surfaces; Also great for cleaning threads and files; Comes skin-packed.
BrandLisle OE Part Number14160
0.0
On backorder
AED11994
+
LISLE HEADLIGHT ADJUSTING RATCHET -- Features extra long handle that allows easy access to hard-to-reach spaces; Has 4 mm hex with a roller clutch for infinite settings; Works on Ford aerodynamic headlights with rear mounted adjusters; Comes skin-packed.
BrandLisle OE Part Number14540
0.0
On backorder
AED13794
+
LISLE CYLINDER HONE STONE AND WIPER SET -- 5 in. long; 3 to 4-1/4 in., 4 to 6-1/4 in., and 6-1/8 to 10-1/4 in. cylinder range; Consist of two stones and two wipers; For 280 Grit; This part is used for engine cylinder hone part number 15000; Compatible with rack set part numbers 15540, 15530, and...
Application1 set each of 15500 coarse stones and 15510 medium stones BrandLisle
0.0
On backorder
AED3294
+
LISLE CYLINDER HONE SPRING -- This part is used for small cylinder hone part number 16000.
BrandLisle OE Part Number16340
LISLE UNIVERSAL CAMSHAFT BEARING TOOL SET -- 1.125 to 2.690 in. size range; Includes driving shaft, driving shaft extension, expander unit, five expanding collets, five sleeve sets, two driving collars, centering cone, and blow molded case; Removes or inserts camshaft bearings in nearly all...
BrandLisle OE Part Number18000
LISLE WINDOW AND DOOR CLIP REMOVER AND INSTALLER -- Designed to easily and quickly remove and install door handle and window crank clips; Helps prevent damage to door panel upholstery; Opposite end firmly holds clip for easy installation; Works on GM, Ford, and others using the common C type clip.
BrandLisle OE Part Number18600
0.0
On backorder
AED14394
+
LISLE OIL DISPENSER -- Made of translucent polyethylene material enables the user to read the oil level on the container up to 6 quarts; Features flexible and removable 8 in. white pouring spout enables easy transfer of liquids; Marked in both quarts and liters; Comes in master pack.
BrandLisle OE Part Number19732
0.0
On backorder
AED6294
+
LISLE OIL DISPENSER FUNNEL AND CAP, GRAY -- A reliable funnel and cap for 6 qt. oil dispenser part number 19732.
BrandLisle OE Part Number19742
0.0
On backorder
AED14394
+
LISLE OIL DISPENSER -- Made of translucent polyethylene material enables the user to read the oil level on the container up to 6 quarts; Features flexible and removable 8 in. red pouring spout enables easy transfer of liquids; Marked in both quarts and liters; Comes in master pack.
BrandLisle OE Part Number19752
0.0
On backorder
AED7794
+
LISLE SPRAY BOTTLE -- 1 quart spray bottle; Made of durable polyethylene bottle; With caustic material resistant trigger mechanism; Can be used with light oils, solvents, and detergents.
BrandLisle OE Part Number19772
0.0
On backorder
AED6294
+
LISLE HOSE PINCHER SET, 2 PIECES -- A quick and easy way to pinch off lines, fuel lines, and brake lines without damaging the line; Comes skin-packed.
BrandLisle OE Part Number22850
0.0
On backorder
AED7494
+
LISLE HOSE PINCHER -- Made of glass-filled nylon for extra strength; Features angled jaws that create a complete seal every time; Jaws are offset for hard-to-reach areas; Designed to clamp and hold hoses up to 3/4 in. I.D.; For use on brake hoses, vacuum hoses, heater hoses, and all flexible...
BrandLisle OE Part Number23000
0.0
On backorder
AED7194
+
LISLE GLAZE BREAKER STONE SET -- 320 grit; A durable stone replacement for stone-type glaze part number 23500; Suitable for use when installing only; Comes skin-packed.
BrandLisle OE Part Number23540
0.0
On backorder
AED4494
+
LISLE SPECIAL CUTTER BLADE -- Availed with 1.5 mm, 1/16 in., 1.75 mm, 2 mm, and 1/4 in. sizes; This part is used for ring groove cleaner with part number 24000.
Application1\u002F16 in. BrandLisle
0.0
On backorder
AED20988
+
LISLE COMPUTER SAFE CIRCUIT TESTER -- Designed to be safe for automotive computers and will not damage sensitive; Draws less than 21 mA. at 12 volts DC; Operating range 3-28 volts; Red light indicates positive polarity while green indicates negative polarity.
BrandLisle OE Part Number24550
0.0
On backorder
AED9588
+
LISLE REPLACEMENT BULB -- A high quality, direct fit replacement bulb for circuit tester part number 24550.
BrandLisle OE Part Number24560
0.0
On backorder
AED52788
+
LISLE SEAL DRIVER KIT -- Includes sixteen adapters for up to 3-3/8 in. diameter and special adapters for shielded seals, 1 washer, and 1 handle; Used for sealing drive seals without damage; Comes in clam shell packaging.
BrandLisle OE Part Number24800
0.0
On backorder
AED11094
+
LISLE HANDY HOOKER CIRCUIT TESTER -- A hooded probe designed to protect your fingers and automatically centers the wire; Small size allows easy to use in the tightest places; Quickly test low voltage up to 28 volts; With alligator clip to ground the tester.
BrandLisle OE Part Number25600
0.0
On backorder
AED6594
+
LISLE LOW CIRCUIT TESTER -- Includes insulated grounding clip; Designed to quickly check both AC and DC current up to 28 volts with power on; Helps locate short or breaks in wiring.
BrandLisle OE Part Number26250
0.0
On backorder
AED22794
+
LISLE UNIVERSAL NOID LIGHT -- Includes two probe adapters for larger diameter probes; A versatile tool that is designed to test the throttle body injectors, ported fuel injectors, and sequential central port injectors; One-man operation; Comes in a clam shell packaging.
BrandLisle OE Part Number27800
0.0
On backorder
AED28494
+
LISLE RATCHETING LOCK NUT TOOL -- Features 2-in-1 tool with double-ended design for both sizes of ratcheting style lock nuts; Can be used with 1/2 in. square drive; Fits Ford 1986-1994 light trucks with Dana 44 front axle for small end, 1985 and newer Ford F150-F350 trucks with the Dana 80 full...
BrandLisle OE Part Number28000
0.0
On backorder
AED10194
+
LISLE HEAVY DUTY CIRCUIT TESTER -- Features probe, handle, cord and clamp that are reinforced for extra durability; Designed to quickly tests low voltage up to 28 volts; A heavy duty circuit tester for lifetime use; Comes with a strain relief spring on the cord.
BrandLisle OE Part Number28400
0.0
On backorder
AED3894
+
LISLE REPLACEMENT BULB -- A high quality, direct fit replacement bulb for handy hooker circuit tester part number 25600.
BrandLisle OE Part Number28440
0.0
On backorder
AED23994
+
LISLE ULTIMATE CIRCUIT TESTER KIT -- Features heavy-duty coil cord extends over 8 ft. and a detachable, spring-loaded hook that pulls the center of the wire into the probe; Designed to find electrical shorts, checks polarity, detects battery drain, and checks circuits from a distance; Tests low...
BrandLisle OE Part Number28640
0.0
On backorder
AED15294
+
LISLE CIRCUIT TESTER PLIERS -- Draws less than 19 mA at 12 volts DC within operating range of 6-28 volts; Safe for use on automotive computer circuits; Dual probe; Has a polarity indicator; The first probe enables you to check hard-to-reach connections and can be flipped back when not in use...
BrandLisle OE Part Number28850
0.0
On backorder
AED18894
+
LISLE UNIVERSAL BRAKE CALIPER BIT SET -- 3/8 in. square drive; Includes four Torx with sizes T-40, T-45, T-47, and T-50 and five hex bits with sizes 1/4 in., 3/8 in., 7 mm, 8 mm, and 10 mm; With handy sleeve that keeps bits together in one place; Comes skin-packed.
BrandLisle OE Part Number29150
0.0
On backorder
AED22194
+
LISLE HAND IMPACT TOOL SET -- 3/8 in. square drive with 3/8 in. drive bit holder; Includes numbers 1, 2, 3 phillips, and 3/8 in. straight slot bits; Features a unique design that delivers over 200 ft. lbs. of shock torque; Can be reversed to tighten; Can also be used with impact sockets.
Application#2 BrandLisle
0.0
On backorder
AED8994
+
LISLE HIGH-LOW CIRCUIT TESTER -- Low-side checks AC and DC current up to 28 volts with power on while high-side checks spark plug wires without piercing; Designed to check both low voltage and spark plug wires; Comes complete with an insulated clip.
BrandLisle OE Part Number29500
0.0
On backorder
AED3894
+
LISLE INSERT BIT -- Number 3 phillips for 5/16 in. hex drive insert bit; Comes skin-packed.
BrandLisle OE Part Number29550
0.0
On backorder
AED3894
+
LISLE INSERT BIT -- Number 1 phillips for 5/16 in. hex drive insert bit; Comes skin-packed.
BrandLisle OE Part Number29630
0.0
On backorder
AED3894
+
LISLE INSERT BIT -- Number 2 phillips for 5/16 in. hex drive insert bit; Comes skin-packed.
BrandLisle OE Part Number30180
0.0
On backorder
AED11694
+
LISLE AUTOMATIC CENTER PUNCH -- 5-1/2 in.; Features automatic action that fires to create a dimple when downward pressure is applied; Works on metal, plastic, wood, and other materials; Pressure can be varied by turning the knurled knob; Comes with a replaceable hardened tool steel tip; No hammer...
BrandLisle OE Part Number30280
0.0
On backorder
AED14694
+
LISLE CV BOOT CLAMP PLIERS -- A sturdy, low-cost tool that works on earless-type clamps including those found on GM inboard CV joints; Comes skin-packed.
BrandLisle OE Part Number30500
0.0
On backorder
AED18594
+
LISLE CV BOOT CLAMP PLIERS -- Designed for use with a torque wrench as required for stainless steel bands; For all ear-type clamps including GM FWD outboard CV joints; Comes skin-packed.
BrandLisle OE Part Number30800
0.0
On backorder
AED8694
+
LISLE FLEXIBLE RETRIEVING TOOL -- 23 in.; Features flexible cable construction; Used for picking up loose parts in hard-to-reach areas.
BrandLisle OE Part Number31140
LISLE FLARING TOOL ADAPTER -- 5/16 in.; A replacement adapter for double flaring tool set.
BrandLisle OE Part Number31390
0.0
On backorder
AED5394
+
LISLE SCRIBE -- Made of heat-treated carbon steel points; Features knurled aluminum handle to provide a sure grip; Used for marking metal and softer material surfaces; Designed with straight 90 degree points to make an even the tightest places; Comes skin-packed.
BrandLisle OE Part Number31800
0.0
On backorder
AED15294
+
LISLE HEAVY DUTY CIRCUIT TESTER AND JUMPER -- Features probe, handle, cord, and clamp that are reinforced for durability; A 2-in-1 tested that is designed to check low voltages up to 28 volts and as jumper for powering electrical components or as a ground; Comes with a strain relief spring on the...
BrandLisle OE Part Number32900
0.0
On backorder
AED6594
+
LISLE PISTON RING INSTALLER -- Features tapered jaws to remove and install most passenger car and light truck rings from 3/64 to 1/4 in.; Comes skin-packed.
BrandLisle OE Part Number33500
0.0
On backorder
AED7494
+
LISLE PLASTIC FASTENER REMOVER -- This tool quickly removes various types of plastic fasteners that hold on weather stripping, radiator shrouds, fender linings, air dams, and other plastic or rubber parts; Equipped with a sliding urethane button for use when extra leverage is necessary; Comes...
BrandLisle OE Part Number35260
0.0
On backorder
AED9894
+
LISLE DOOR PANEL REMOVER -- This tool is used to remove door panel fasteners even in tight places; Features bent handle design that allows use where space is limited and provides extra prying force; Comes with unique, square cutout in the tool tip that provides a no-slip grip even on the...
BrandLisle OE Part Number35350
0.0
On backorder
AED7494
+
LISLE DOOR UPHOLSTERY REMOVER -- This rugged tool with a large comfortable handle is used to remove plastic fasteners; Comes skin-packed.
BrandLisle OE Part Number35400
0.0
On backorder
AED16794
+
LISLE BODY TRIM TOOL SET, 3 PIECES -- Includes clip remover that helps remove door handle and window crank clips on GM, Ford, and others using common C-type clip and upholstery and panel removers that are designed for plastic fasteners; Comes with stepped, square cutout in the tool tip that...
ApplicationDoor Upholstery Remover BrandLisle
0.0
On backorder
AED21894
+
LISLE DUAL OVERHEAD CAM LOCK TOOL -- This versatile tool easily locks and holds both camshaft sprockets firmly in place; Comes with a unique design that uses knurled pins to hold against the inside of the cam sprockets; Has two parallel bars that float which allows the knurled pins to align with...
BrandLisle OE Part Number36880
0.0
On backorder
AED3894
+
LISLE A/C AND FUEL LINE DISCONNECT TOOL -- 3/8 in.; This tool disconnects air conditioning and quick connect fuel lines.
BrandLisle OE Part Number37050
0.0
On backorder
AED6294
+
LISLE FUEL MODULE DISCONNECT TOOL -- Fits both 3/8 in. and 5/16 in. connector sizes; Features a two-piece design that allows access to the connectors; Designed to disconnect the fuel module on 98 and later GM Full Size Pickups, Suburban, and Tahoe; Slides the proper size into the connector;...
BrandLisle OE Part Number37500
0.0
On backorder
AED15294
+
LISLE EXHAUST REMOVAL PLIERS -- Separates exhaust hanger brackets from rubber supports; Works on all import and domestic car and truck exhaust systems that use the rubber hanger supports; Comes skin-packed.
BrandLisle OE Part Number38350
0.0
On backorder
AED8694
+
LISLE NO SPLATTER PAD, 8 PIECES -- 22 in. square pad; Fits all standard transmission drain funnels and larger size drain pans; Features a porous material that allows fluid to quickly pass through into funnel or pan while the pad material resists engine oil, transmission fluid, coolant, brake...
ApplicationMaterial Fibers may Contaminate the Fluid BrandLisle
0.0
On backorder
AED14994
+
LISLE NO SPLATTER PAD, 6 PIECES -- 15 in. diameter round pad; Fits all standard oil lift drain funnels and oil pans; Features a porous material that allows fluid to quickly pass through into funnel or pan while the pad material resists engine oil, transmission fluid, coolant, brake fluid, brake...
BrandLisle OE Part Number38780
0.0
On backorder
AED5394
+
LISLE INSTALLER ADAPTER, SHORT -- 8 mm; This part is used for no slip pulley puller tool with part number 39000.
BrandLisle OE Part Number38920
0.0
On backorder
AED14094
+
LISLE FRONT HUB AND KNUCKLE SEPARATOR -- Made of strong steel for durability; Designed to separate the frozen hub assembly from the steering knuckle on Dodge and GM pickups, Cadillac, Jeep, and other applications.
BrandLisle OE Part Number39300
0.0
On backorder
AED12294
+
LISLE ANGLED DISCONNECT TOOL SET, 6 PIECES -- 5/16 in., 3/8 in., 1/2 in., 5/8 in., 3/4 in., and 7/8 in.; Made of durable plastic that resists fuels and solvents; Features handles that are angled to access tight spots; Designed to disconnect spring lock couplings on Ford and Chrysler AC lines;...
Application3\u002F8 BrandLisle
0.0
On backorder
AED6894
+
LISLE ANGLED DISCONNECT TOOL SET, 3 PIECES -- This set includes 3/8 in. and 5/16 in. disconnects for fuel lines and 5/8 in. for fuel lines and air conditioning connections; Features angled handles to access tight spots.
Applicationand 5\u002F8 in. for fuel lines and air conditioning connections BrandLisle
0.0
On backorder
AED34794
+
LISLE MASTER DISCONNECT SET -- A complete set of disconnect tools for A/C and fuel lines that can be stored in a handy blow-molded case.
ApplicationAC\u002FFuel Line Disconnect Set BrandLisle
LISLE TRANSMISSION LINE DISCONNECT -- 1/2 in.; A disconnect tool for transmission oil cooler line disconnect part number 39960.
BrandLisle OE Part Number39910
LISLE SCISSOR DISCONNECT -- Fits most 5/16 in. or 3/8 in. fuel lines with spring lock connections.
BrandLisle OE Part Number39930
LISLE TRANSMISSION OIL COOLER LINE DISCONNECT SET -- Includes 3/8 in. size for 2003 and later Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS while 1/2 in. is for Ford Super Duty Trucks, F250, F350, and F450; Tip is specially stepped to fit connector; Comes skin-packed with a bead chain.
BrandLisle OE Part Number39960
0.0
On backorder
AED8094
+
LISLE METRIC LONG ARM HEX KEY SET, 12 PIECES -- Made of heat-treated alloy steel that allows for longer reach of deep socket Allen-type screws; Increases torque; Comes skin-packed.
BrandLisle OE Part Number42650
0.0
On backorder
AED17994
+
LISLE HOSE CLAMP VISES -- 3-5/8 in. long and opens to 2-1/8 in.; Used to relieve clamp spring pressure in very tight spots; Compact design works great in confined spaces.
BrandLisle OE Part Number44480
0.0
On backorder
AED5094
+
LISLE REPLACEMENT TIP SET, 4 PIECES -- Includes 0.45 in. and 0.060 in. straight tips, 0.045 in. x 45 degree tip, and 0.035 in. x 90 degree tip; This replacement set is used for combination internal and external snap ring plier with part number 46000.
BrandLisle OE Part Number46250
0.0
On backorder
AED12594
+
LISLE RELAY PULLER PLIERS -- This tool is used for removing electrical relays on most domestic and imported vehicles; With specially designed tips that are angled to fit slots or edge of relay cover; Allows relay to pop free from socket with less chance of damaging the relay; Works on many...
BrandLisle OE Part Number46950
0.0
On backorder
AED9894
+
LISLE IMPORT CAR BRAKE CLIP TOOL -- Designed for import cars with brake shoe hold-down clips; Removes and installs the brake clip and nail on brake shoes in seconds; Comes skin-packed.
BrandLisle OE Part Number48400
0.0
On backorder
AED10848
+
LISLE REPLACEMENT TIP SET, 10 PIECES -- 0.60 in. x 75 degree, 0.060 in. x 15 degree, 0.075 in. x 75 degree, 0.075 in. x 15 degree, 0.090 in. x 75 degree, 0.090 in. x 75 degree, 0.108 in. x 75 degree, 0.108 in. x 75 degree, 0.125 in. x 75 degree, and 0.125 in. x 75 degree; Includes two each of the...
BrandLisle OE Part Number49460
0.0
On backorder
AED20394
+
LISLE OIL FILTER PLIER -- 2-1/4 to 1/4 in. range; Features sure grip teeth to prevent slipping; Designed with cushioned handle to provide comfort; Comes skin-packed.
BrandLisle OE Part Number50750
0.0
On backorder
AED26094
+
LISLE TRUCK AND TRACTOR OIL FILTER PLIER -- 3-5/8 to 6 in. range; Features sure grip teeth to prevent slipping; Designed with cushioned handle to provide comfort; Come skin-packed.
BrandLisle OE Part Number50950
0.0
On backorder
AED3894
+
LISLE REPLACEMENT BLADE SET, 5 PIECES -- Made of strong stainless steel; This replacement part is used for razor blade scraper with part number 25000.
BrandLisle OE Part Number51320
0.0
On backorder
AED7494
+
LISLE PUTTY KNIFE AND SCRAPER, SATIN -- 1-1/4 in.; Made of tempered steel blade with polypropylene handle for easy cleanup; Features one piece blade with satin finish; Ideal for scraping old putty, paint, dirt, and carbon; Can also be used for applying putty.
BrandLisle OE Part Number51350
0.0
On backorder
AED3594
+
LISLE REPLACEMENT BLADE SET, 5 PIECES -- Made of durable plastic; This replacement part is used for razor blade scraper with part number 25000.
BrandLisle OE Part Number52080
0.0
On backorder
AED8394
+
LISLE RAZOR BLADES, 100 PIECES -- Made of stainless steel; Features single edged razor and resealable pack design for organized storage; Fits all standard razor blade tools including Lisle 52000 razor blade scraper; Comes in clam shell packaging.
BrandLisle OE Part Number52150
0.0
On backorder
AED11094
+
LISLE CARBURETOR ADJUSTING TOOL -- Includes four adapters that are conveniently stored in the hollow handle; A heavy-duty flexible shaft for easy access; Designed to adjust idle or mixture screws on GM and Chrysler.
BrandLisle OE Part Number55250
0.0
On backorder
AED18294
+
LISLE CLUTCH ALIGNMENT TOOL -- Includes shafts and bushings that provide an exact fit for eight pilot bearing sizes; Tapered cone handles the rest; Designed to easily, quickly, and accurately align or replace clutch plates and pilot bearings.
BrandLisle OE Part Number55500
0.0
On backorder
AED70794
+
LISLE OIL PAN PLUG RETHREADING KIT -- Includes a piloted drill, spring-loaded tapping tool, and five magnetic drain plugs; Features a unique tapping tool that ensures the new thread will be perpendicular to the gasket surface to prevent leakage; Works on soft steel and aluminum oil pans with 1/2...
Application12mm & 14mm threads BrandLisle
0.0
On backorder
AED5994
+
LISLE TRIPLE SQUARE WRENCH -- 10 mm; 1/2 in. hex drive; This 12 point bit fits some head bolts, retaining bolts, disc brake calipers, and other applications; Comes skin-packed.
BrandLisle OE Part Number60780
0.0
On backorder
AED6594
+
LISLE TRIPLE SQUARE WRENCH -- 12 mm; 1/2 in. hex drive; This 12 point bit fits some head bolts, retaining bolts, disc brake calipers, and other applications; Comes skin-packed.
BrandLisle OE Part Number60790
0.0
On backorder
AED16794
+
LISLE METRIC CLUTCH ALIGNMENT TOOL -- Includes shaft, ten pilot bushings, and two tapered plate alignment cones with graduated turned diameters for automatic fit of most metric clutch plates; Designed to easily, quickly, and accurately align or replace clutch plates and pilot bearings.
BrandLisle OE Part Number61750
0.0
On backorder
AED7494
+
LISLE HEATER HOSE COUPLER REMOVER -- Designed to remove broken heater hose couplers; Comes skin-packed.
Applicationallowing you to turn it out with a 5\u002F8 in. socket or wrench BrandLisle
LISLE EXTRACTOR BIT -- For 1/4 in. bolts; Made of a special hardened, shock-resistant steel; Use 1/8 in. drill.
BrandLisle OE Part Number62560
LISLE EXTRACTOR BIT -- For 5/16 in. bolts; Made of a special hardened, shock-resistant steel; Use 11/64 in. drill.
BrandLisle OE Part Number62570
0.0
On backorder
AED11994
+
LISLE SUPER OUT EXTRACTOR BIT SET -- Includes five extractor bits; Made of a special hardened, shock-resistant steel; Extracts 1/4 to 1/2 in. and larger bolts and screws; Cuts its way straight into bolts eliminating wedging or further tightening of frozen bolts and screws; Works on both left and...
BrandLisle OE Part Number62900
0.0
On backorder
AED46494
+
LISLE BROKEN SPARK PLUG REMOVER -- Includes a unique porcelain pusher tool for pressing the porcelain piece farther into the plug tip and a tapered left-hand thread remover for removing the broken spark plug without leaving the porcelain in the engine cylinder; Removes broken spark plugs from...
BrandLisle OE Part Number65600
0.0
On backorder
AED45594
+
LISLE VACUUM PUMP -- Made of one-piece zinc die cast for durability and improved performance; Designed to check all vacuum operated components on car; Field repairable; Comes with detailed illustrated manual cover vacuum testing; Worn O-rings, seals, and valves can be replaced with 75400 repair...
BrandLisle OE Part Number75000
0.0
On backorder
AED7194
+
LISLE REPLACEMENT FLUID -- A replacement fluid that changes from blue to yellow when exposed to combustion gases from the radiator.
BrandLisle OE Part Number75630
0.0
On backorder
AED7194
+
LISLE COMBUSTION LEAK DETECTOR FLUID -- 16 oz.; For use on combustion leak detector art number 75500; Indicating fluid changes from red to yellow when exposed to diesel combustion gases in the radiator; Designed to detect combustion leaks on diesel engines.
BrandLisle OE Part Number75730
0.0
On backorder
AED5394
+
LISLE POP-IN WHEEL -- 2 in. diameter; 2-3/4 in. overall height; For plastic creeper; Made of urethane that resists corrosion; Comes with metal compression ring that holds wheel stem in groove, yet pulls free when pressure is applied.
BrandLisle OE Part Number92132
0.0
On backorder
AED5994
+
LISLE REPLACEMENT RUBBER WHEEL -- 2 in. diameter; 2-1/2 in. overall height; Includes cap nut; For low profile steel creeper; An oil-resistant plastic ball bearing wheel that offers a quiet, easy glide even over rough floors.
BrandLisle OE Part Number96132
0.0
On backorder
AED5994
+
LISLE REPLACEMENT BOLT-ON WHEEL -- 2 in. diameter; 2-1/2 in. overall height; Includes cap nut; For older style plastic creeper part numbers 96402, 96502, 96602, 96702, and 96802; This oil resistant plastic ball bearing wheel offers a quiet, easy glide even over rough floors.
BrandLisle OE Part Number96422
0.0
On backorder
AED8694
+
LISLE REPLACEMENT POP-IN WHEEL -- 4 in. diameter; For plastic creepers; Made of urethane that rolls better on all surfaces; Works especially well on cracked or uneven floor surfaces and under heavy loads; With roller that fits the conventional Lisle plastic creeper models 92102, 93102 and 94102.
BrandLisle OE Part Number96572